开元棋牌

Location:Home > CNC peening machine > Shot Peening machines and equipment > Digital control shot peening machine for aviation industry

Shot Peening machines and equipment

Digital control shot peening machine for aviation industry

In the aviation industry, it has higher requirement, not only the spare parts material should be light, but also it can bear extreme load in bad environment. By virtue of protecting the surface of spare parts from exterior destroy and extend the lifetime, our surface treatment can improve the whole performance of spare part.

 

Digital control shot blasting application:

Fatigue- by virtue of implanting extrusion stress to effectively control the production of the fatigue split.

Mild wear-mild wear can result in the fatigue damage, suitable shot blasting can improve the surface contact of parts and produce extrusion stress on the surface, so as to decrease the mild wear.

Stress corrosion split-decrease the surface stretch stress or make it lower than the critical point to remove split caused by stress corrosion.

Aircraft parts peening

Most of the spare parts used in aviation industry, including airplane frame, wings, motors, landing gear, driving device, or transmission parts( gear); all adopt shot blasting treatment to meet its performance specifications.

 

shot blasting machine for airplane parts

shot blasting machine for airplane parts

  Manual and automation integrated super fine sandblasting machine for airplance motor parts

Manual and automation integrated super fine sandblasting machine for airplance motor parts

This set of super fine automatic sandblaster for medical appliance is designed and manufactured by a  Shanghai Janpan-invested company, with PLC integrated electrical control, servo system control of workpiece loading system; this automatic sandblasting equipment applies to precision medical appliance sandblasting treatment, to meet the world top level requirement of precise medical appliance. 

 

This set of manual and automation integrated fine sandblaster for  airplane motor parts is designed and manufactured for a Shanghai joint-venture company, the working way are manual and automatic models, with PLC integrated electrical control,  the part up and off adopts manual supplementary way; the equipment  is used for super fine sandblasting repair of the motor parts, to meet the world top level requirement of aviation airplane motor。


Digital control shot blasting formed machine tool

Digital control shot blasting formed machine tool

Shot peening is a good way to form a complicated air power curve. This process without the module for the formation of airplane wing is ideal. It can also be used to remove the distortion of complicated parts due to processing or hot treatment.

 

Shot peening is a good way to form the complicated air drive curve, this is the ideal process to form the airplane wing, this process can also be used to remove distortion caused by processing or heat treatment of complicated parts.
The process can improve the performance of lifting, and reduce oil consumption and environment pollution.
The shot peening formation can be used to meet requirements of surface curvature, thickness, shape, and reinforced rib and process deformation.

The shot peening formation is a way to save money, used by many airplane manufacturers. It need no mould, so the expensive mould developing and manufacturing fees can be saved.

 

 

Copyright © Shanghai Liangshi All Rights Reserved.    Shanghai ICP No. 05016443  Site Map
555棋牌游戏 开元棋牌 爱尚彩票平台 69棋牌游戏大厅 天天乐棋牌 555棋牌游戏官网 京都棋牌 光明棋牌 京都棋牌 开元棋牌